028 3742 1888
028 3742 1888
MSL7 Residual Current Circuit BreakerCurrent MSL7 Residual Current Circuit BreakerCurrent MSL7 residual current device is in conformity with the standards of IEC61008. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. It can be used in circuits up to single phase 240V, threephase 415V, 50 or 60Hz. S000090 Cầu Dao Tự Động Số lượng: 1 cái

MSL7 Residual Current Circuit BreakerCurrent

  • MSL7 residual current device is in conformity with the standards of IEC61008. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leakage. It can be used in circuits up to single phase 240V, threephase 415V, 50 or 60Hz.
MSL7 2P
MSL7/C6-0.1 2P
MSL7 C50
MSL7/C50-0.03 2P

1. Main Technical Parameter.

 

Type MSL7
Pole 2P, 4P
Rated current In(A) 25,40,63,80,100
Rated residual operating current (I∆nA) 10,30,100,300,500
Rated non-operating current for earth leakage I∆n(A) 0.5I∆n
Voltage Un(V) 240(220) 415(380)
Residual current off-time: <0.1s
Minimum value of rated making and breaking capacity 1KA
Rated conditional short-circuit current (Inc) In=25,40A Inc=1500A In=63A Inc=3000A

 

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây